It includes Base Cutters of different shapes and scales and rollers with spacers needed to create bases for miniature figures.
Use the Base Cutters and Roller with Spacers for your Tabletop DIY Terrain, Figures, Buildings and Bases and so on. Use them on Air-Drying Clay, Clays or XPS Foam for example.
Use the "BOTTOM" side to cut out the base or base with texture and the other slightly smaller "TOP" side if you have a base and only want to add a texture on top.
Rollers are also available to recreate the exact same and desired thickness again and again with a smooth surface for your bases, use the rollers with spacers. The bigger the spacer, the thicker your Layer for your base will become. If you only create smaller bases you can go with a shorter roller, but if you may create bigger bases then go with one of the longer version.
Rollers lengths: 11.5cm & 22cm. A Spacer with 0.25mm on it will create a thickness of 0.25mm. Available spacer sizes: 0.25mm, 0.3mm, 0.325mm, 0.5mm, 0.75mm, 1.0mm, 1.25mm, 1.5mm, 1.75mm, 2.0mm, 2.25mm, 2.5mm.
